News
Prove the Automatic Screw Fastening Machine on Your Own Workpiece
Buyers should require a demonstration using their actual fasteners and assembly, then verify screw size, torque, and feeding against the quoted configuration.
FIAM launches E-MCB nutrunner motors with E-TCS control unit
FIAM has introduced E-MCB electric nutrunner motors and the matching E-TCS control and power supply unit, both developed in-house. The E-TCS monitors torque, angle and tightening time and stores tightening cycles.
Testing a Circular Vibrating Screen With Your Own Rock or Ore
A buyer's guide to planning a circular vibrating screen demonstration using the buyer's actual rock or ore, with practical questions for the RFQ, trial, and acceptance test.
Testing a Belt Filter Press With Your Own Sludge
A buyer should require a demonstration using their own sludge, not a generic sample, and compare gravity drainage, wedge formation, roller pressing and belt washing under stated conditions.
Ball Screw Assembly Trials: Test With Your Own Workpiece
A buyer's guide to demonstrating a 32 mm ball screw assembly with a 10 mm lead using the buyer's actual workpiece, plus what to confirm before requesting a quote.
Abssac Introduces Miniature Ball Screw Assembly
Abssac says it has a precision ball screw and nut assembly with a 1.8mm diameter and 0.5mm lead. The company describes it as possibly the smallest of its kind and cites C3-05 accuracy with 0.005mm axial play.
Testing a Sanding Disc Die-Cutter on Your Own Abrasive Stock
Buyers should require a demonstration on their own sandpaper or abrasive cloth, then verify disc quality, cut consistency, and throughput against the reference specifications before acceptance.
Demonstrating an AOI Machine on Your Own PCBs
A buyer's guide to requiring an AOI demonstration on the buyer's own printed circuit boards, with practical checks on resolution, speed, and 3D white-light inspection.
Multiview AOI System for Automotive Display Panels Uses Improved YOLOv8n Detector
A study reports a multiview automated optical inspection system for automotive display panels, built around YOLO-OG, a detector derived from YOLOv8n. The authors say it combines multiview imaging, dust suppression and region-of-interest preprocessing, and report gains over the baseline and in production-line validation.
Edge Banding Trials: Test the Machine With Your Own Panels and Tape
A buyer's guide to planning an edge banding demonstration using your own wood panels and edge tape, with practical checks for thickness range, feed speed, and minimum panel size.
Testing an Automatic Concrete Block Making Machine With Your Own Concrete
A buyer's guide to demonstrating an automatic concrete block making machine using the buyer's actual concrete mix, with practical checks for cycle time, mold output, and acceptance testing.
Qunfeng Highlights QS Block-Making Machines at Trade Shows
Qunfeng Intelligent Machinery presented its QS-series automatic concrete product forming machines at several exhibitions, citing a third-generation servo-vibration system and localized service for buyers in Southeast Asia, Latin America, Africa and other markets.
Testing an Automatic Flatbed Die Cutter With Your Own Board
A buyer's guide to planning a flatbed die cutter demonstration around the buyer's own paper or cardboard, with practical RFQ questions and acceptance checks.
Testing a Flap Disc Forming Machine With Your Own Abrasive Cloth and Plates
A buyer's guide to running an automatic flap disc forming machine demonstration with the buyer's abrasive cloth and backing plates, covering disc size, T27/T29 profiles, and single or double flap arrangement.
Testing a Multi-Head Embroidery Machine on Your Own Fabric
A buyer's guide to requiring a demonstration on your actual fabric and workpiece, with practical checks for a six-head machine and a 900 × 1,500 mm standard embroidery area.
Testing an Automatic Liquid Filling Machine With Your Own Liquid
Buyers should require a demonstration using their actual liquid and bottles, then compare filling accuracy, changeover, and cleaning against the reference range of 10–500 mL and 30–110 mm bottle diameter.
Demonstrating an Automatic Conveyor Sandblasting Machine on Your Own Parts
For an automatic conveyor sandblaster, the decisive demonstration is a trial run on the buyer's actual metal workpieces, checking finish, throughput, and fit within the stated chamber and conveyor settings.
What to check at your site before machinery arrives
Confirm packed dimensions, unloading arrangements, installation space, and utility connections.
What to prepare before requesting an equipment quote
Collect the workpiece, process, quantity, and delivery details that shape a machinery quotation.
How to compare two machine tool quotations
Put the workpiece requirements, configurations, included items, and acceptance criteria side by side.