Testing a Multi-Head Embroidery Machine on Your Own Fabric
A buyer's guide to requiring a demonstration on your actual fabric and workpiece, with practical checks for a six-head machine and a 900 × 1,500 mm standard embroidery area.
Ask the supplier to demonstrate the six-head machine on your own fabric and workpiece, not on house samples. This single decision exposes how the machine handles your material's thickness, stretch, and finish, and it gives you a realistic basis for acceptance.
In the request for quotation, specify the exact fabric you will run and ask whether the demonstration will use it. Confirm the standard embroidery area per head of 900 × 1,500 mm as a reference value and ask the supplier to show how your largest design fits within it. Ask whether the maximum machine speed of 1,200 rpm is used during the demonstration or whether a lower speed is chosen for your material, and request that the setting be recorded.
During the demonstration, compare stitch quality across all six heads on the same design. Check registration between heads, fabric marking, and how the material is hooped or framed. Ask what happens when one head is stopped. For an acceptance test, agree on sample pieces, the speed used, and pass criteria before the visit.
Before requesting a quote, confirm with the supplier which fabric and workpiece will be used in the demonstration, whether the 900 × 1,500 mm area and 1,200 rpm figure apply to the offered configuration, and how acceptance samples will be judged.