Prove the Automatic Screw Fastening Machine on Your Own Workpiece
Buyers should require a demonstration using their actual fasteners and assembly, then verify screw size, torque, and feeding against the quoted configuration.
A buyer should not accept a demonstration run on the supplier's sample parts alone. Ask for the automatic screw fastening machine to be shown driving your actual fasteners into your assembly, because feeding reliability and torque delivery depend on the real combination of screw and workpiece.
For the request for quotation, state the screw sizes you will run. The catalog reference lists M1.0–M5.0 and a maximum tightening torque of 4.9 N·m; treat these as reference values, not guarantees for the model offered. Ask whether the quoted automatic screw feeder is configured for your smallest and largest screws, and how it handles your head style and length mix.
In the demonstration, use your own parts and check: does the feeder present screws without jams across a realistic run; does each screw seat consistently; and can torque be set and held at the level your joint requires? Include an acceptance test on a defined batch, with pass criteria for seating, thread engagement, and damage to the workpiece.
Before requesting a quote, confirm with the supplier which workpiece and fastener samples they need, whether the demonstration machine matches the quoted configuration, and how acceptance results will be recorded.