News
Demonstrating a Cast-Resin Dry-Type Transformer With the Buyer's Own Load Profile
A buyer's guide to planning a dry-type transformer demonstration around the buyer's actual load profile, with practical checks for the RFQ, witness test, and acceptance.
HPS adds Arizona and southern Nevada to Electris360/ElectroRep territory
Hammond Power Solutions has extended Electris360/ElectroRep's representation into Arizona and southern Nevada. The agency already covers California and northern Nevada for the dry-type transformer maker.
Demonstrating a Corrugated Board Line on Your Own Paper
A buyer's guide to requiring a corrugated board production line demonstration using the buyer's own paper, with practical checks tied to 5-layer board, 1,800 mm width and 120 m/min design speed.
Cold-Chamber Die Casting Machine: Prove It on Your Aluminum Part
A buyer's guide to requiring demonstration trials on the buyer's own aluminum workpiece, with practical questions for the RFQ, demo, and acceptance test.
Demo an Electric Counterbalance Forklift With Your Own Pallets
Buyers should require a demonstration using their own pallets and loads, then confirm load, battery, and acceptance details in the RFQ.
Hangcha introduces AI-guided forklifts and new electric models
Hangcha showed five LINGTRA AI-Fork robots driven by its LogiMind AI model, plus a new electric counterbalance series and two X Series reach trucks, at its global dealer conference in Hangzhou.
CMM Demonstrations: Test With Your Own Workpieces
A buyer's guide to requiring a coordinate measuring machine demonstration on the buyer's actual industrial workpieces, with practical checks tied to measuring travel, resolution, and maximum workpiece mass.
Hexagon adds wireless contact probing to HYPERSCAN scanning system
Hexagon's Portable Metrology Division announced a wireless probe that brings contact measurement to its HYPERSCAN large-volume laser scanning system. The company says this improves productivity during alignment, inspection and reporting.
Demonstrating a Diesel Generator Set With the Buyer's Own Load
For a 90 kW prime / 100 kW standby, 60 Hz, 1,800 rpm diesel generator set, the most useful demonstration runs the buyer's actual load profile, not a resistive test bank alone.
Caterpillar Adds 2,750 kW Rating to Cat 3516E Diesel Genset
Caterpillar Inc. has introduced a 2,750 kW rating for the Cat 3516E diesel generator set, intended for 60 Hz standby applications, according to the company.
Testing a Closed-Frame Die Forging Press on Your Own Steel
A buyer's guide to planning a demonstration of a closed-frame die forging press using the buyer's own steel workpiece, with practical questions for the RFQ and acceptance test.
Demonstrating a CNC Six-Sided Panel Drilling Machine With Your Own Panels
A buyer's guide to planning a demonstration of a CNC six-sided panel drilling machine using your own wood panels, with practical checks on thickness, width, length, and tool magazine capacity.
Demo the CNC Bridge Saw on Your Own Stone
A buyer's guide to planning a CNC bridge saw demonstration using the buyer's actual stone, with practical checks for blade size, spindle power, working envelope, and table tilt.
Bridge Saw Shipment to Colombia Announced by iGOLDENCNC
iGOLDENCNC says a bridge saw stone cutting machine is due to be shipped to Colombia. The company links the shipment to demand from South American stone fabricators and says the machine is intended for cutting granite, marble, quartz and other stone.
Demonstrating a CNC Hydraulic Press Brake on Your Own Steel
A buyer's guide to planning a press brake demonstration around the buyer's actual steel workpiece, with practical checks on bending force, length, stroke, and throat depth before acceptance.
Baileigh launches compact CNC press brake for workshop use
Baileigh Industrial has introduced the BP-3305CNC press brake, a compact CNC hydraulic machine with a two-axis programmable controller, 33 tons of force over a 1.6 m length, and an automated light curtain for safety.
Demonstrating a CNC Four-Roll Plate Rolling Machine with Your Own Steel
Buyers should require a demonstration on their own steel and workpiece geometry, then verify pre-bending and rolling results against the machine's rated values before acceptance.
Demo the CNC Fabric Cutter on Your Own Fabric
A buyer's guide to requiring a demonstration on the buyer's actual fabric, with practical questions for the RFQ, demo, and acceptance test.
Demo the Gantry Grinder on Your Own Steel Workpiece
A buyer's guide to requiring a demonstration of the CNC Gantry Surface Grinder on the buyer's actual steel workpiece, with practical questions for the RFQ, demo, and acceptance test.
Demonstrating a CNC Panel Nesting Router on Your Own Wood Panels
A buyer's guide to planning a nesting router demonstration around the buyer's actual wood panels, with practical questions for the RFQ, demo, and acceptance test.
Stacking Machine Demos: Test With Your Electrode Sheets
A buyer's guide to requiring a battery cell stacking machine demonstration using the buyer's own electrode sheets, with practical checks for Z-fold alignment, two-station output, and 10–30 mm stacks.
Manz launches BLA platform for lithium-ion cell production
Manz has introduced its BLA series, a configurable laminating and stacking production platform for hard case and pouch lithium-ion cells, usable as a pilot system or in automated mass production.
Demonstrating a Battery Formation and Capacity Grading System With Your Own Cells
A buyer's guide to planning a formation and grading demonstration around the buyer's own battery cells, with practical questions on formats, channels, regenerative power, and acceptance testing.
Testing a Centrifugal Spray Dryer With Your Own Liquid Feed
Buyers should require a trial on their own liquid before accepting a centrifugal spray dryer, agreeing on feed preparation, atomizer speed, temperatures, and what counts as a successful dried product.