News
Demonstrating a Photovoltaic Module Laminator With Your Own Materials
A buyer's guide to planning a laminator demonstration around the buyer's actual photovoltaic modules, covering chamber layers, effective lamination area, and temperature ramp control.
Proving a Custom Crate Mold With Your Own PP and Part
For a custom plastic injection mold, make the demonstration run on your own PP and a crate-sized part, and tie acceptance to agreed sample criteria rather than catalog figures.
3D-Printed Polymer Mold Inserts Tested for Prototype Injection Molding
IPC, a French plastics and composites technical center, worked with ARaymond on 3D-printed polymer mold inserts. The aim was to injection mold cable-clip prototypes in the final production material before committing to metal tooling.
Trial Your Own PP/PE Film on a Plastic Crushing and Washing Line
A buyer's guide to planning a demonstration of a plastic crushing and washing line using the buyer's own PP and PE film or PP woven bags, with practical questions for the trial and acceptance test.
Testing Medium-Voltage Switchgear With Your Own Load Material
A buyer's guide to planning a switchgear demonstration around the buyer's actual material, with RFQ questions on withdrawable units, ratings, and acceptance checks.
W-Industries Releases 38kV Metal-Clad Switchgear for Data Centers
W-Industries has made its U.S.-engineered 38kV metal-clad switchgear available, citing UL-witnessed testing and a supply gap for medium-voltage gear. Wood Mackenzie data cited by the company shows rising demand.
Testing a Medium-Frequency Induction Melting Furnace With Your Own Metal
Buyers should require a demonstration melt using their own charge material, then confirm capacity, frequency and power claims against agreed acceptance criteria rather than catalog values alone.
Demonstrating a Pharmaceutical Freeze Dryer With Your Own Product
A buyer's guide to planning a freeze-dryer demonstration using the buyer's pharmaceutical product, with practical questions on shelf area, temperature range and vacuum for the RFQ and acceptance test.
Proving a Progressive Stamping Die on Your Own Sheet Metal
A buyer's guide to planning a die demonstration around the buyer's actual sheet metal and custom part design, with practical questions for the RFQ, trial run, and acceptance test.
Testing a Paper Roll Slitter Rewinder With Your Own Paper
A buyer's guide to demonstrating a paper roll slitter rewinder using the buyer's own paper stock, with practical checks for slitting width, unwind diameter, and power supply during trials and acceptance.
Proving a Natural Gas Generator Set With Your Own Load
For a 400 kW, 500 kVA, 50 Hz natural gas generator set, the demonstration should use the buyer's actual load profile and gas supply, not a generic test bench.
College adds Caterpillar generator for hands-on power training
Midland College received a donated Caterpillar G3516C natural gas generator set to support power generation training. Faculty said students will practice maintenance and troubleshooting and use Caterpillar software.
Demo a Mini Crawler Excavator on Your Own Soil
Buyers should require a mini crawler excavator demonstration on their own soil, then compare bucket fill, cycle behavior, and acceptance checks against the reference values in the quotation.
Testing an Overhead Bridge Crane With Your Own Workpiece
A buyer should require a demonstration using their actual material, not a test weight, and define the load, lift height, and handling checks that will decide acceptance.
Trials That Matter: Testing a Mechanically Agitated Flotation Cell on Your Ore
A buyer's guide to planning a demonstration of a mechanically agitated flotation cell using the buyer's own ore slurry, with practical questions for the trial protocol and acceptance criteria.
Testing an Industrial Water Chiller With Your Own Process Load
A buyer's guide to planning a chiller demonstration around the buyer's actual cooling load, using catalog values such as 65 kW nominal cooling capacity only as reference points.
Daikin Applied Unveils 60 MW Cooling Design for AI Data Centers
Daikin Applied has introduced a 60 MW cooling reference architecture for AI factories, combining water-cooled chillers with dry coolers. The design uses liquid cooling for most of the load and targets reduced water use.
Demonstrating an Electrode Coater With Your Own Foil and Slurry
A buyer's guide to requiring a demonstration on the buyer's electrode foil and slurry, with practical checks on continuous coating, drying sections, and air supply before acceptance.
Testing an Industrial Gear Reducer With Your Own Workpiece
A buyer should require a demonstration using their actual material or workpiece, then compare observed behavior with the catalog reference values for a right-angle helical-bevel reducer.
China’s revised recommended standard for harmonic drive reducers takes effect in April 2027
GB/T 14118-2026 replaces the 1993 product standard. A separate update to harmonic gear drive terminology takes effect on the same date.
Ultrasonic Cleaning Trials: Test Your Own Workpieces
Buyers of a three-tank industrial ultrasonic cleaner should require a demonstration using their own metal parts, then compare results against agreed acceptance criteria before ordering.
Weber Ultrasonics Forum Highlights Cavitation and Megasonic Cleaning
Weber Ultrasonics hosted its first 360° Ultrasonics Technology Forum in Ettlingen on October 22, 2026, with almost 100 experts attending. Topics included cavitation physics, simulation-assisted process optimization, megasonic cleaning, and a partnership with Japan's Kaijo Corporation.
Demonstrating a Marine Mooring Winch with the Buyer's Own Rope
A buyer should require a demonstration using their actual mooring rope, then verify line pull, line speed, and drum capacity against the reference values in the brief.
Machine Vision Demo: Test With Your Own Workpieces
A buyer's guide to requiring a machine vision inspection station demonstration on the buyer's actual industrial workpieces, with practical questions for the RFQ, demo, and acceptance test.