News
FAT Checks for a Wet High-Shear Mixer Granulator
Buyers should define measurable pass or fail checks for mixing, granulation, and control functions before signing off a wet high-shear mixer granulator at the factory.
Pass/Fail Checks for a Wheel Balancer Factory Acceptance Test
A buyer's guide to defining practical pass or fail checks for a wheel balancer factory acceptance test, using the stated maximum wheel diameter, maximum wheel weight, and automatic optical measurement as reference points.
BendPak Ranger Wheel Service Line Certified to U.S. and Canadian Safety Standards
BendPak says its Ranger tire changers and wheel balancers have been certified to applicable U.S. and Canadian safety standards after an 18-month redesign and testing process.
Factory Acceptance Checks for a Wet Grid Ball Mill
A buyer's guide to defining practical pass or fail checks for a wet grid ball mill, using catalog reference values only as a starting point for RFQ and acceptance discussions.
Factory Acceptance Checks for a Vertical Form Fill Seal Machine
Buyers should define measurable pass or fail checks for bag dimensions, film handling, and sealing before signing off a vertical form fill seal machine at the factory.
Sealed Air launches ZeroPrep hand-dispensing condiment pouches
Sealed Air's CRYOVAC brand has introduced ZeroPrep pre-filled condiment pouches and a vertical form-fill-seal system that produces them, aimed at cutting prep and cleanup work in foodservice kitchens.
Factory Acceptance Tests for a Vertical Machining Center: Defining Pass or Fail
A buyer's guide to setting practical pass or fail checks for a VMC factory acceptance test, using catalog reference values only as a starting point for supplier confirmation.
UK launch of Makino DA300 and Okuma Genos five-axis VMC to be shown by NCMT
NCMT will present the UK launch of Makino's DA300 five-axis machining centre with a Cellro robotic loader, and the Okuma Genos M460V-5AX vertical machining centre, at a show.
FAT Checks for a Warehouse Stacker Crane: Turning Specs into Pass/Fail Tests
Buyers should convert pallet load, height, and travel speed into measurable factory acceptance tests, then agree on tolerances and test conditions before signing off.
Factory Acceptance Checks for a Variable-Speed Rotary Screw Compressor
A buyer's guide to defining pass or fail checks for a 15 kW variable-speed rotary screw compressor, using catalog air delivery figures as reference values and turning them into practical FAT questions.
Atlas Copco adds three variable-speed compressor lines, R513A dryer option
Atlas Copco has introduced three VSD oil-injected rotary screw compressor ranges from 5 to 45 kW. The company says the GA VSD+ lines can cut energy use by up to 60% versus fixed-speed units, and Full Feature models use R513A refrigerant in integrated dryers.
Factory Acceptance Checks for a Truck-Mounted Workover Rig
How buyers can define practical pass or fail checks for a truck-mounted onshore workover rig, using the stated hook load and depth figures as reference points in the FAT plan.
Factory Acceptance Checks for a Triplex Drilling Mud Pump
Buyers should turn rated power, speed, drive, and pressure options into measurable pass or fail checks before accepting a triplex mud pump at the factory.
Pass/Fail Checks for a Tubular Pasteurizer Factory Acceptance Test
A buyer's guide to defining practical pass or fail checks for a 1 t/h tubular pasteurizer FAT, covering flow, heat exchange, and documentation questions to put in the RFQ.
FAT Checks for a Twin-Strand PVC Pipe Extrusion Line
How buyers can turn the pipe diameter range, output figures and power rating into practical pass or fail checks during a factory acceptance test.
Factory Acceptance Checks for a Tumble-Belt Shot Blasting Machine
Buyers should agree pass or fail checks for batch load, part weight, volume, and rated productivity before signing off a tumble-belt shot blasting machine at the factory acceptance test.
Factory Acceptance Checks for a Vacuum Gas-Quenching Furnace
Buyers should define measurable pass or fail checks for temperature range, load handling, and gas pressure before signing off a vacuum gas-quenching furnace at the factory.
Factory Acceptance Checks for a Two-Post Vehicle Lift
Define pass or fail criteria for a two-post lift FAT using the stated capacity, height, pad and motor reference values, and agree test methods with the supplier before signing off.
Pass or Fail Checks for an SMT Reflow Oven Factory Acceptance Test
A buyer's guide to defining practical pass or fail checks for an SMT reflow oven factory acceptance test, using the 12-zone, 300 mm, 300 °C reference configuration as a starting point for RFQ and test planning.
Factory Acceptance Checks for a Stainless Steel Agitated Reactor
Buyers can turn vessel capacity, material grade, and agitator speed into concrete pass or fail checks for a factory acceptance test of a stainless steel agitated reactor.
Pass/Fail Checks for a Six-Axis Robot Factory Acceptance Test
Buyers should define measurable acceptance checks for an assembly robot, using catalog values such as 25 kg payload, 1,831 mm reach and ±0.02 mm repeatability as reference points, not guarantees for a supplied unit.
Factory Acceptance Checks for a Tire Changer
A buyer's guide to defining pass or fail checks for a tire changer factory acceptance test, using wheel diameter, air pressure, and footprint as practical reference points.
Heavy-Duty Tire Changer Updates Target Fleet Maintenance
ARI-HETRA has updated its heavy-duty tire changers with hydraulic and remote features. Hunter Engineering has launched the TC37 and TC39 center-clamp models, aimed at the mid-range segment.
Factory Acceptance Checks for a Three-Phase Separator
Buyers should define measurable pass or fail checks for a three-phase oil, gas and water separator before factory acceptance testing, covering vessel dimensions, connections and listed pressure.